Skip to main content
615 Roof, roofing in Nashville TN 615-431-3789

Gutters, Skylights & Roofline

Fascia, soffit and drip edge repair and replacement for a tight, dry, well-ventilated roofline

The roof edge is where wood rots first. Fascia, soffit and drip edge protect the framing and let the attic breathe.

Call or text today615-431-3789

Request roofing service

Tell us what is going on. We will contact you to confirm the details and set up a time to look at the job.

Or call 615-431-3789

By sending this you agree that we may contact you about your project. See our Privacy Policy.

Prefer to type? Text your request to 615-431-3789

Fascia, Soffit & Drip Edge

Fascia boards hold gutters, soffits close the underside of the eaves and drip edge guides water off the roof. When any of them fails, water gets behind trim, rot spreads into rafters and birds, squirrels and wasps move in.

We repair and replace fascia, soffit and drip edge across Nashville and Middle Tennessee. We remove rotten wood, install new fascia in wood, aluminum or composite, add vented soffit to feed the attic and fit drip edge so water leaves the roof cleanly.

What you get

Done right, from the first walk-through

01

Rot repair

Damaged fascia and rafter tails replaced.

02

Vented soffit

Intake vents that feed attic ventilation.

03

Drip edge

Metal edging that directs water into the gutter.

04

Animal-proofing

Gaps closed against pests entering the roofline.

The process

How your service comes together

  1. 1

    Inspect the roofline

    We probe fascia and soffit for rot and gaps.

  2. 2

    Remove and replace

    Damaged trim comes off and new trim goes on.

  3. 3

    Finish and seal

    We paint or finish and seal the joints.

FAQ

Common questions about fascia, soffit & drip edge

How do I know if fascia is rotten?

Soft spots, peeling paint, dark stains and gutters pulling away are common signs.

Should soffits be vented?

Yes. Vented soffits provide the air that ridge vents and other exhaust vents rely on.

What material is best for fascia?

Wood, aluminum and composite all work. We discuss upkeep and appearance with you.

Let us help with your fascia, soffit & drip edge

Call, text or send the form. Tell us what you are seeing on the roof or in the attic and where, and we will take it from there.

615-431-3789Text