Skip to main content
615 Roof, roofing in Nashville TN 615-431-3789

Flat & Low-Slope Roofing

Modified bitumen roofing: multi-layer, rugged protection for low-slope roofs

Modified bitumen roofs use reinforced, asphalt-based sheets that are layered for strength and applied with heat, adhesive or self-adhering backing.

Call or text today615-431-3789

Request roofing service

Tell us what is going on. We will contact you to confirm the details and set up a time to look at the job.

Or call 615-431-3789

By sending this you agree that we may contact you about your project. See our Privacy Policy.

Prefer to type? Text your request to 615-431-3789

Modified Bitumen Roofing

Modified bitumen, often called mod-bit, is an upgrade on built-up roofing. Rolls of asphalt blended with polymers and reinforcement are laid in two or more plies, creating a tough surface that stands up to foot traffic and weather.

We install and repair modified bitumen roofs across Nashville and Middle Tennessee. We use torch-applied, cold-adhesive or self-adhered systems depending on the building, and we pay special attention to seams, laps, drains and flashing.

What you get

Done right, from the first walk-through

01

Multi-ply protection

Layers add strength and redundancy.

02

Application method options

Torch, adhesive or self-adhered based on the building.

03

Granulated cap sheet

A surface that resists UV and foot traffic.

04

Careful seam and flashing work

Edges and penetrations detailed to stay watertight.

The process

How your service comes together

  1. 1

    Evaluate the roof

    We inspect deck, insulation and drainage.

  2. 2

    Install the plies

    Base and cap sheets are applied and lapped.

  3. 3

    Flash and finish

    Details are completed and checked.

FAQ

Common questions about modified bitumen

Is modified bitumen safe to install?

Torch applications need trained installers and safety precautions. We also offer cold-applied and self-adhered options.

How is it different from TPO or EPDM?

Mod-bit is a multi-layer asphalt system. TPO and EPDM are single-ply membranes.

Can mod-bit be coated?

Yes. Reflective coatings can extend life and reduce heat.

Let us help with your modified bitumen

Call, text or send the form. Tell us what you are seeing on the roof or in the attic and where, and we will take it from there.

615-431-3789Text